PS5 Pro Overheating Repair Vienna
Your PS5 Pro shuts down under load or the fan runs at full speed all the time? The stronger GPU runs hotter — once the liquid metal on the chip has aged or the cooler is clogged with dust, the cooling can't keep up. Reparo fixes that in Vienna for EUR 89.
Typical signs of PS5 Pro overheating
- PS5 Pro shuts itself off during graphically demanding games
- Fan stays at full speed — audible even in the home menu
- "PS5 is too hot" warning shows up regularly
- Rear of the case gets uncomfortably warm during play
- Frame drops and stutters after longer sessions
- PS5 Pro is only a few months old but already noticeably loud
PS5 Pro overheating — price & service scope
| Service (all-in) | Price | Time | Warranty |
|---|---|---|---|
| PS5 Pro — liquid metal renewed + fan + cooling system cleaned | EUR 89 | 2–4 hrs | 6 months |
PS5 Standard overheating: also EUR 89 · PS5 Slim: EUR 79 — go to PS5 overheating service
Price is confirmed before we start. No hidden costs.
How the PS5 Pro overheating repair works
- Send in or book a pickupShip the PS5 Pro from anywhere in Austria, or use the Vienna pickup service. A short note about when the console shuts down helps us.
- Open up and lift the coolerWe strip the PS5 Pro housing, detach the cooler from the chip and check the state of the liquid metal.
- Renew the liquid metalWe remove every trace of the old liquid metal from the chip and the cooler base and apply a thin, even fresh layer — without a single drop reaching the board.
- Clean the cooler and fanWe clear dust from the cooling fins, take out the Pro's larger fan completely and deep-clean it blade by blade.
- Stress test and returnWe push the PS5 Pro under full load, log the temperatures, then deliver it back in Vienna or ship it insured.
Why the PS5 Pro overheats — and what is different from the Standard PS5
The PS5 Pro has a noticeably more powerful GPU than the Standard PS5. More compute means more waste heat. According to Sony's official teardown, the PS5 Pro (CFI-7000) still follows the same principle as the Standard PS5: liquid metal carries the heat from the chip into the heatsink. What's new are fine grooves that keep the liquid metal in place, plus a larger fan with redesigned blades. Once dust clogs the fins or the liquid metal has aged, the cooling capacity drops below what the chip needs.
Grooves against seepage — what the Pro does differently
Liquid metal moves heat better than any paste, but it is fluid and electrically conductive. On the Standard PS5 it can creep away from the chip over the years. On the Pro, Sony added grooves to the contact area that hold it back. It can still age, though: once it dries out or spreads unevenly, the chip temperature climbs. The treatment is the same on the Pro and the Standard PS5 — strip the old liquid metal and apply a fresh layer.
Why the PS5 Pro overheats faster than the Standard PS5
Many more compute units, heavier ray-tracing workloads — it all adds up. Even small amounts of dust in the cooling fins can eat into the PS5 Pro's thermal headroom. On the Standard PS5 the same dust load would not be a problem yet. That's why regular service matters more for the Pro version.
Repair or buy a new PS5 Pro?
A new PS5 Pro is around EUR 800. For EUR 89 Reparo fixes the overheating — with fresh liquid metal on the chip and a cleaned cooler the console runs at the temperatures it had on day one. Every piece of data, every save and every installed game stays exactly where it is.
PS5 Pro overheating — frequently asked questions
How much does a PS5 Pro overheating repair cost at Reparo?
EUR 89 flat. That covers fresh liquid metal, a fan deep-clean, cleaning of the cooling system and a full-load stress test. No hidden extras.
Is the PS5 Pro repair more expensive than the Standard PS5 one?
No. The overheating repair costs the same on the Pro and the Standard PS5: EUR 89. The work is essentially identical — renew the liquid metal, clean the fan and cooler, then finish with a stress test under load.
Does the PS5 Pro use liquid metal like the Standard PS5?
Yes. Sony's official teardown shows liquid metal between the chip and the cooler on the PS5 Pro (CFI-7000) too. New are fine grooves meant to stop it from seeping. During the overheating repair we renew this liquid metal completely.
Why did Sony add grooves for the liquid metal on the PS5 Pro?
Liquid metal is fluid at room temperature and can drift away from the chip over the years. The fine grooves in the contact area hold it in place. It can still age, though — rising temperatures and a fan that stays loud are the sign that it needs renewing.
Why does the PS5 Pro overheat faster than the Standard PS5?
The PS5 Pro has a stronger GPU with many more compute units. Under load that means a lot more waste heat. Even small amounts of dust in the cooling fins can eat the thermal reserve — the same dust load on a Standard PS5 would not be a problem yet.
My PS5 Pro is only a few months old and already loud — is that normal?
Some fan noise under load is normal. If the fan stays at maximum permanently or the console shuts down, something is off. Causes range from dust pulled in by the environment, to liquid metal that has spread unevenly on the chip, to a faulty fan. We diagnose it as part of the repair.
Can I send the PS5 Pro in for repair?
Yes — ship it from anywhere in Austria. Pack it well and include a short description of the fault. In Vienna we also offer pickup. Book a slot and drop off in the 22nd district, have it picked up, or send it in: all three routes are open.
Are all data and saves preserved after the repair?
Yes. The 2 TB SSD inside the PS5 Pro is never touched during the overheating repair. Installed games, saves, profiles and settings remain exactly as they were.
How long does the PS5 Pro overheating repair take?
2–4 hours once we have the console. That covers stripping the housing, renewing the liquid metal, fan cleaning and the closing stress test under full load.
Is there a warranty on the PS5 Pro overheating repair?
Yes, 6-month warranty on every step we perform. If the overheating returns during that window, we put it right at no charge.
Can I renew the PS5 Pro liquid metal myself?
We don't recommend it. Liquid metal conducts electricity — one drop next to the chip can short components on the board. On top of that the PS5 Pro housing needs specific tools to open, and the new layer has to sit thin and even, otherwise cooling gets worse instead of better.
What is the difference between PS5 Pro cleaning and the overheating repair?
Cleaning (EUR 79) is preventive — dust out, fan and cooling fins cleaned, the liquid metal is only inspected. The overheating repair (EUR 89) is the fix once the PS5 Pro is already shutting down: the liquid metal is renewed completely and the fan is deep-cleaned.
Will I lose my Sony warranty by having Reparo do the repair?
That depends on Sony's warranty terms: an existing manufacturer warranty can lapse after a third-party repair. Check this first while your PS5 Pro is still covered by Sony. Our own work comes with a 6-month warranty.
Is the repair worth it or should I just buy a new PS5 Pro?
A new PS5 Pro is around EUR 800. The overheating repair at Reparo is EUR 89 and brings the console back to factory-fresh temperatures. For a console that's otherwise healthy and only has a thermal issue, repair is the clearly economical call.
Can overheating damage the PS5 Pro permanently?
Yes. Sustained high temperatures can weaken the solder joints on the mainboard and in the worst case lead to BLOD (Blue Light of Death). The sooner the overheating is fixed, the smaller the risk of permanent damage.
Fix PS5 Pro overheating — book now
EUR 89 flat · liquid metal + fan + cooler · 2–4 hours · 6-month warranty · Vienna pickup service or send-in from anywhere in Austria. Diagnostic check EUR 25, waived on repair.