Samsung Galaxy S10+ Charging Port Repair Vienna
Does your Galaxy S10+ get noticeably hot while charging or break off the 15W fast charge? That is not a battery problem but usually a charging port issue – bent pins, oxidation on the contacts or a faulty USB controller chip on the flex. Reparo replaces the complete charging port flex on the Galaxy S10+ for a €79 fixed price in Vienna. 40–60 minutes of work, fresh IP seal, 6 months warranty on part and installation.
Galaxy S10+ charging port price at a glance
Charging port replacement
All-in fixed price incl. installation
- Certified USB-C 3.1 replacement flex
- 15W fast charging fully functional again
- IP68 seal is renewed
- Calibration of charge detection
- 6 months warranty on flex and installation
Diagnostic check without repair 25 EUR (waived on repair). Pickup service Vienna included.
Typical charging port problems on the Galaxy S10+
- The USB-C 3.1 port on the Galaxy S10+ shows visibly bent or crooked pins after a forceful plug-in
- The Galaxy S10+ no longer charges at all – even with a new cable and adapter the battery stays at 0 %
- Your Galaxy S10+ breaks off the 15W charge after a few minutes and drops to slow charging
- The PC connection on the Galaxy S10+ keeps cutting out – the data lines in the charging port are oxidised
- The USB-C 3.1 port on the Galaxy S10+ is clogged with dust, lint or foreign objects – the cable no longer fits in properly
- When connecting a charging cable the Galaxy S10+ briefly vibrates or beeps and immediately drops the connection again
- After a short circuit in the port the Galaxy S10+ occasionally reports system restarts when plugging in – a consequence of a faulty USB controller on the flex
The Galaxy S10+ launched in 2019 with a USB-C 3.1 charging port – 7 years later, with high usage figures, typical wear patterns appear: worn-out pins, oxidation on the data lines, loose solder joints on the flex. The USB-C 3.1 port supports up to 5 Gbit/s and 15W charging – the 24 contacts are mechanically stressed with every plug-in. Reparo replaces the complete charging port unit, not just individual pins – that is significantly more durable. See also our Galaxy S10+ repair overview with all available services.
How does the Galaxy S10+ charging port replacement work?
- Intake check and pin analysis
Under the microscope we check the USB-C 3.1 port on the Galaxy S10+ for bent pins, foreign objects, oxidation and wear marks. With water contact an additional pad check on the mainboard, so we fix not just a symptom but the cause.
- Detach the back cover
On the Galaxy S10+ we release the glued back with controlled heat (about 65 °C) and iFixit-compatible suction cups. The adhesive film on the frame is carefully removed so it can be replaced during reassembly.
- Disconnect the battery – safety first
Before anything happens on the charging circuit of the Galaxy S10+, the battery connector is disconnected from the mainboard. This prevents short circuits on the USB-C 3.1 controller and protects the flash storage from unforeseen voltage spikes.
- Remove the old USB-C 3.1 flex in a controlled way
The charging port unit on the Galaxy S10+ is fixed to the mainboard with screws and a zero-insertion-force connector (incl. microphone module). Detach the flex, document the screw sequence, lift the old part out of the frame.
- Fit the new USB-C 3.1 charging port
The replacement flex (USB-C 3.1 charging port flex with jack connection) is fitted on the Galaxy S10+ in exactly the same position. Screws with defined torque, connector pressed with controlled pressure. No bending, no pulling – incorrect load costs pin contact.
- Renew the seal and close the housing
The old IP68 adhesive film is completely removed on the Galaxy S10+, a new Samsung-compatible seal is inserted, the back cover bonded under defined pressure. After 20–30 minutes of curing time the sealing level is back to factory standard.
- Function test 15W charging + data pins
Final test with a calibrated power supply on the Galaxy S10+: the charge protocol starts at 15W, pin contacts are checked for wobble behaviour, data transfer via USB to a test PC. Only when everything runs stably does the device go back to you.
Reparo has no open shop, but you can hand in your device after booking a drop-off slot in the 22nd district, or use pickup or mail-in.
Replacing the Galaxy S10+ charging port – price, process and service details in Vienna
The charging port on the Galaxy S10+ is the mechanically most stressed port of the device – every plug-in strains the USB-C 3.1 pins. After 2–3 years of daily use mechanical limits appear: pins wear out, data lines oxidise, solder joints on the flex tear. Reparo replaces it in Vienna for a €79 fixed price – certified replacement flex, new IP68 seal, 6 months warranty. Anyone who notices further problems on the device often benefits from a combined repair – see our separate S10+ battery replacement for details.
Certified replacement flex vs. Samsung original – what do you get?
For the Galaxy S10+ we fit charging ports that match the Samsung flex exactly: same USB-C 3.1 standard, same USB-PD certification, same form factor. Samsung service packs are only available through authorised Samsung service centres – our OEM-compatible parts last measurably as long and carry the identical pin assignment. You will find all further repair options on the Samsung repair overview.
Frequently asked questions about the Galaxy S10+ charging port replacement
What does the charging port repair for the Galaxy S10+ cost?
The charging port repair costs €79 fixed price for the Galaxy S10+ at Reparo in Vienna. Included: a new USB-C 3.1 charging port as a certified replacement flex, a fresh IP68 seal, calibration of charge detection and 6 months warranty. The diagnostic check (25 EUR) is waived on repair.
How long does the charging port replacement take on the Galaxy S10+?
40–60 minutes of work in the Reparo studio in Vienna. The pickup service in Vienna drives to you in the morning, the repair runs in the afternoon, return often the same day. With the send-in service from the provinces we plan 2–4 working days total incl. shipping.
Does the Galaxy S10+ charge with 15W fast charging again after the replacement?
Yes. The 15W fast charge on the Galaxy S10+ runs via the USB-PD controller on the charging port flex – exactly that part is replaced. Our replacement part has the identical USB-PD 3.0 certification as the original, so the full charging speed is available again. We test this after installation with a measuring device.
Does Reparo fit original or replacement charging ports on the Galaxy S10+?
For the Galaxy S10+ we use certified Samsung-compatible charging ports – same USB-C 3.1 standard, same USB-PD power, same form factor. Original Samsung service pack parts are only available through authorised Samsung service centres. Our alternatives come from specialised OEM manufacturers that also supply Samsung.
Does the IP68 protection stay intact on the Galaxy S10+ after the charging port repair?
Yes. On the Galaxy S10+ we renew the IP68 seal around the mainboard as part of the repair – where the charging port is mounted. After a professional installation your device has the original protection against splashing water and dust again. We generally do not recommend active diving after any housing intervention.
Is any data lost during the charging port replacement on the Galaxy S10+?
No. Flash storage, Samsung account, SIM card and microSD (if present) are not disconnected during the charging port replacement. Photos, WhatsApp chats, apps, Wi-Fi passwords – everything stays intact. We still recommend a Samsung Cloud backup before every repair as a standard precaution.
How does my Galaxy S10+ get to the repair – pickup or send-in?
You have two options with the Galaxy S10+: pickup service in all 23 Vienna districts (1010–1230) – the courier collects, returns it repaired, and it is included in the €79 fixed price. Or send-in from anywhere in Austria with insured shipping (Graz, Linz, Salzburg, Innsbruck, Klagenfurt) – return shipping also included, processing 2–4 working days.
Can I drop off my Galaxy S10+ at Reparo?
Three ways: pickup service in Vienna, mail-in from anywhere in Austria, or drop-off at a booked appointment in the 22nd district. The only options for the Galaxy S10+ are the pickup service in Vienna (we come to you) or send-in by post from the provinces. That saves you the trip and often returns your device the same day.
How long is the warranty on the new charging port on the Galaxy S10+?
Six months on the charging port and the installation. If a contact problem, loose contact or fast-charge failure occurs again during that time, we replace it free of charge. Not covered: new mechanical damage from force or foreign objects such as keys or coins in the port.
Do I lose the Samsung warranty through the charging port replacement on the Galaxy S10+?
The original Samsung warranty expires with any third-party intervention. On the Galaxy S10+ (built in 2019) the manufacturer warranty has usually expired anyway. The Reparo warranty on the new charging port flex applies for 6 months in parallel and is valid across Austria.
Can I first clean the charging port on the Galaxy S10+ myself before doing the replacement?
Yes, with dust or lint careful blowing out with compressed air or a dry wooden toothpick helps. Not recommended: needles, metal tools or moist cotton swabs – these bend pins or cause short circuits. If cleaning does not help or the cable still wobbles afterwards, the port is mechanically worn out – then a replacement is the only solution.
My Galaxy S10+ had water contact and no longer charges – is that a pure charging port case?
Sometimes yes, sometimes no. With water contact moisture often settles first on the USB-C 3.1 pins and corrodes there. If only the charging port is affected, a replacement for €79 is enough. With corrosion on the mainboard an additional ultrasonic bath is necessary – we check that during the diagnosis (25 EUR, waived on repair) on the Galaxy S10+.
How do I tell whether the charging port on the Galaxy S10+ is really faulty or just the cable?
Test at least two other original cables and adapters on the Galaxy S10+. If it does not charge cleanly with any of them, the fault is in the USB-C 3.1 port. Additional hint: if wobbling the cable changes the charge, it is almost certainly the port. If in doubt we check it during the diagnosis for a fee (25 EUR, waived on repair) – safer than permanently buying the wrong cable.
Is the charging port replacement on the Galaxy S10+ still worth it in 2026?
The Galaxy S10+ from 2019 is currently still supplied by Samsung with security updates – check the update status on samsung.com directly. Charging port repair €79 vs. a comparable used device from about €300, plus setup, new 2FA, data migration. The repair is the economically better choice in almost all cases.
What does the diagnosis cost on the Galaxy S10+ if I just want it checked first?
The diagnosis costs 25 EUR and is fully waived on a repair order. On the Galaxy S10+ we check loose contact, pin geometry, the USB controller chip and the behaviour during fast charging (15W). After that you get a fixed-price quote and can decide freely. No obligation to repair.
Replace the Galaxy S10+ charging port in Vienna – book an appointment
Fixed price €79, 40–60 minutes of work, certified USB-C 3.1 replacement flex, 15W fast charging functional again, IP68 seal renewed, 6 months warranty. Diagnostic check 25 EUR, waived on repair. Pickup service Vienna or send-in from Austria.