Xiaomi Mi 10T Pro Screen Replacement Vienna
A crack running straight across the Mi 10T Pro's 6.67-inch IPS LCD after a fall? The 144 Hz gaming display can be replaced without touching the Pro model's 108-megapixel camera system. Reparo replaces the screen on your Mi 10T Pro in Vienna: EUR 159 fixed price, done in 2–3 hours, 6-month warranty.
Xiaomi Mi 10T Pro Screen Replacement – Price & Service
What to expect
The Mi 10T Pro is opened, the faulty 6.67-inch IPS LCD is removed and replaced with a certified aftermarket display. The 108-megapixel camera module sits on the back and is completely separate from the display area – it is not touched during the screen swap. After fitting, we run a complete touch test across the whole surface, a 144 Hz image test and a check of all colour ranges.
Usually 2–3 hours. With pickup in Vienna we mostly return the device the same day. If you send the Mi 10T Pro in from another federal state, allow 1–3 business days after it arrives with us.
Touch, image and 144 Hz scrolling all work flawlessly again. The side fingerprint sensor in the power button stays untouched by the screen swap – it works afterwards with no re-calibration. All photos, apps and settings are unchanged after the repair. 6-month warranty.
EUR 159 fixed price for the compatible IPS LCD display – including fitting and a 6-month warranty. The Mi 10T Pro and the standard Mi 10T share the same display panel, so the same price applies. Diagnostic check 25 EUR, waived if you go ahead with the repair.
Typical display faults on the Xiaomi Mi 10T Pro
On the Mi 10T Pro the protective glass and the IPS LCD panel are firmly bonded together. A crack after a fall – whether straight across the whole 6.67-inch panel or only at the edge – almost always means replacing the complete display module. The camera system on the back is typically not affected by the damage.
Individual black, white or coloured pixels appear when there is an internal fault in the IPS panel. Unlike AMOLED burn-in, LCD pixel faults cannot be reduced with software tricks – only a module replacement reliably fixes the problem.
The touchscreen ignores touches in certain areas entirely, or reacts with a delay. The digitiser layer in the IPS LCD module is damaged – often the result of a fall that only lightly scratches the glass on the outside but damages the panel internally.
The backlight shines through the panel at the corners or edges – visible as bright patches on dark content. This is a specific IPS LCD fault: the backlight is part of the module and cannot be repaired separately.
The smooth scrolling that sets the Mi 10T Pro apart noticeably stutters – even though MIUI still shows 144 Hz. An internally damaged LCD panel can cause these frequency drops. The fault disappears completely after the screen swap.
The Mi 10T Pro has no water-resistance certification. Condensation, rain contact or a wet housing can damage the display module. A diagnosis (25 EUR, waived on repair) clarifies whether only the display or other components are affected as well.
All Xiaomi Mi 10T Pro repairs at a glance.
How the Xiaomi Mi 10T Pro screen replacement works
-
Book an appointment – pickup in Vienna or send-in from Austria
You book your appointment online or call directly. For Vienna, Reparo arranges the pickup service to your address – whether home or workplace. From other federal states you send the Mi 10T Pro in by post and we confirm its arrival.
-
Diagnosis & complete device check
We check the display, touch, battery, charging port, side fingerprint sensor and the 108 MP camera module. That way we know before starting whether the damage is limited to the display. Diagnostic check 25 EUR – fully waived on repair.
-
Open the device & remove the LCD module
The Mi 10T Pro is opened from the back. The IPS LCD module is secured with display adhesive – releasing it requires controlled heat. The camera module on the back stays completely untouched, as it sits in a separate area of the housing.
-
Fit the new IPS LCD
The certified aftermarket display with a 6.67-inch diagonal and 144 Hz support is fitted, all connectors are seated securely and the device is sealed with fresh display adhesive. The 108 MP camera system stays in its original position.
-
Function test across the entire display surface
Touch response across all areas, 144 Hz refresh rate, colour reproduction, brightness levels, backlight uniformity – everything is checked. In addition: fingerprint sensor, all camera functions including the 108 MP main camera, speaker and microphone.
-
Return & 6-month warranty
Your Mi 10T Pro comes back – the same day with pickup in Vienna, within 1–3 business days with a send-in. The display and fitting carry a 6-month warranty. All data, apps and settings stay unchanged.
No personal visit required – Reparo works exclusively by pickup service in Vienna or send-in from anywhere in Austria.
Is a screen replacement on the Xiaomi Mi 10T Pro still worth it?
The Xiaomi Mi 10T Pro stands out from the standard Mi 10T thanks to its 108-megapixel main camera – a sensor that was unique in the mid-range at the time of its release and still delivers noticeably more detail than 64 MP systems today. The display – a 6.67-inch IPS LCD with 144 Hz – is the same as on the standard Mi 10T. Used Mi 10T Pro devices currently cost around EUR 150–220. For EUR 159 you get the display back and keep the 108 MP camera system – which makes the repair a clear case against buying new.
- EUR 159 – transparent fixed price
- 108 MP camera is kept fully intact
- All data, apps and settings are preserved
- 6-month warranty on display & fitting
- Done in about 2–3 hours
- Pickup service Vienna or send-in from Austria
- From around EUR 499 for comparable camera quality
- 108 MP or better: often only in higher price brackets
- Migrate data, set up apps and logins again
- Sell or dispose of the old device
- Getting used to new hardware and interface
If the damage is limited to the display and the 108 MP camera, battery and all other functions run flawlessly, the repair for EUR 159 is the clearly more economical and more sustainable decision.
Which display does Reparo use for the Xiaomi Mi 10T Pro?
We fit a certified IPS LCD aftermarket display with a 6.67-inch diagonal, FHD+ resolution and a 144 Hz refresh rate – the same panel format as the standard Mi 10T, since both models use the same display assembly. The panel is checked before fitting for even backlight, touch response across the entire surface and colour accuracy. The side fingerprint sensor in the power button is part of the housing, not the display – it is not affected by the swap and does not need to be set up again after the repair.
Mi 10T Pro screen broken – what the 108 MP camera system has to do with it
The Xiaomi Mi 10T Pro and the standard Mi 10T share the same display module: IPS LCD, 6.67 inches, FHD+, 144 Hz. The decisive difference lies in the camera system – the Pro model brings a 108-megapixel main camera, the standard variant 64 MP. This separation is technically significant: anyone who reached for the Mi 10T Pro for its 108 MP camera invested in a camera system that remains fully functional even with a cracked display and is preserved by a repair.
Camera module and display – two separate assemblies
The Mi 10T Pro's camera module sits on the back and is housed in its own area of the case. During the screen swap the device is opened from the back, the faulty LCD module is released from the front and replaced with a new one. The camera module lies outside the work area – it is neither touched nor released. The 108 MP camera works exactly as before the damage after the screen repair.
IPS LCD with 144 Hz – why a crack isn't just a crack
On IPS LCD panels the protective glass and the display panel are bonded together as one unit. A fall that leaves a crack in the glass almost always also damages the LCD panel underneath. Typical consequences: black patches, dead touch zones, frozen areas or stuttering scrolling despite the 144 Hz setting being active. A glass-only swap – without replacing the panel – does not make technical sense on the Mi 10T Pro.
Pickup service Vienna and send-in from anywhere in Austria
At Reparo a personal visit is neither possible nor necessary. The Mi 10T Pro is collected by pickup service directly at your address in Vienna and brought back after the repair. If you live outside Vienna, you send the device in by post – after the repair it goes back to you the same way. We clarify all the details in advance at the appointment.
More information: All Mi 10T Pro repairs · Mi 10T screen replacement · Mi 10 screen replacement · Xiaomi repair Vienna
Frequently asked questions about the Xiaomi Mi 10T Pro screen replacement
What does a screen replacement on the Xiaomi Mi 10T Pro cost?
EUR 159 fixed price for the compatible IPS LCD aftermarket display – including fitting and a 6-month warranty. OEM original parts on request, price depending on availability. Diagnostic check 25 EUR, fully waived on repair.
What is included in the EUR 159 price for the Mi 10T Pro?
A certified 6.67-inch IPS LCD aftermarket display with a 144 Hz refresh rate, professional fitting, a complete touch and image test including a 144 Hz check, a backlight check and a 6-month warranty on display and fitting. The 108 MP camera module is also checked for function after fitting.
Is the Mi 10T Pro's display the same as the standard Mi 10T?
Yes. Both models use the same IPS LCD panel with 6.67 inches, FHD+ resolution and a 144 Hz refresh rate. The difference between the devices lies in the camera system – 108 MP on the Pro versus 64 MP on the standard. The display part and the repair price of EUR 159 are identical.
Does the 108 MP camera stay untouched during the screen swap?
Yes, completely. The Mi 10T Pro's camera module is on the back in a separate area of the housing. During the screen swap only the LCD module on the front is replaced – the camera system lies outside the work area and is neither released nor touched.
How long does the screen replacement on the Mi 10T Pro take?
Usually 2–3 hours. With pickup in Vienna you mostly get the device back the same day. With a send-in from other federal states the turnaround is 1–3 business days after the device arrives with us.
Does the Mi 10T Pro have an IPS LCD or an AMOLED display?
The Xiaomi Mi 10T Pro has an IPS LCD panel – not AMOLED. Both Mi 10T variants (standard and Pro) use IPS LCD with 144 Hz. The Mi 10 and Mi 10 Pro, by contrast, have AMOLED. This technology choice let Xiaomi reach the high 144 Hz rate in this device class.
Is the 144 Hz refresh rate kept after the screen swap on the Mi 10T Pro?
Yes. Certified aftermarket displays for the Mi 10T Pro support the full 144 Hz refresh rate and the AdaptiveSync mode. The system recognises the new panel correctly and automatically – smooth scrolling and gaming performance are fully preserved.
Does the fingerprint sensor need to be re-registered after the screen swap?
No. The Mi 10T Pro's fingerprint sensor sits in the side power button and is part of the housing, not the display module. It is not touched during the screen swap and works afterwards with no need to set it up again or re-calibrate the fingerprint.
Can I drop the Mi 10T Pro off for the repair?
Walk-in is not possible at Reparo – we run no shop. The repair runs by pickup service in Vienna or send-in from anywhere in Austria. Book an appointment online or ask by phone – everything else is sorted without a personal visit.
How does the pickup service for the Mi 10T Pro in Vienna work?
Choose an appointment, give your address, confirm a time slot – Reparo comes to you in Vienna, whether at home or at the workplace. The Mi 10T Pro is collected, the display is swapped in 2–3 hours and then delivered back. No effort on your side.
Can I send the Mi 10T Pro in from Styria, Tyrol or other federal states?
Yes, Reparo accepts send-ins from anywhere in Austria. Pack the device securely and ship it by post – we let you know about its arrival. After the repair the Mi 10T Pro goes back to you the same way. Turnaround 1–3 business days after arrival.
Is any data lost during the screen swap on the Mi 10T Pro?
No. During the screen swap only the LCD module is replaced – internal storage, photos, apps and all settings stay fully intact. A MIUI backup before sending the device in is nonetheless recommended.
What warranty is there on the new display of the Mi 10T Pro?
6 months on display and fitting. If pixel faults, touch failure, backlight problems or 144 Hz faults occur without new external damage, we repair them free of charge.
Is a screen replacement on the Mi 10T Pro worth it given the used value?
Used Mi 10T Pro devices currently cost around EUR 150–220. For a EUR 159 screen replacement the 108 MP camera system and all other functions are kept. A comparable new device with a 108 MP camera costs at least EUR 300–400. If the battery and camera run flawlessly, the repair is the economically more sensible choice.
What happens if the Mi 10T Pro's display failed after water contact?
The Mi 10T Pro has no IP certification. Moisture can damage both the LCD module and internal boards. We first diagnose whether the damage is limited to the display or whether other components are affected. Diagnostic check 25 EUR – waived on repair. Give us a quick call and we will discuss the case in advance.
Xiaomi Mi 10T Pro Screen Replacement in Vienna
EUR 159 fixed price · approx. 2–3 hours · 6-month warranty · 108 MP camera stays untouched · pickup service Vienna or send-in across Austria