Poco F7 Pro Screen Replacement Vienna
Is the always-on display on your Poco F7 Pro frozen — the clock and notifications burned in as a black still image, even when the screen is supposed to switch on normally? That is AMOLED pixel retention in the always-on area, a classic symptom on premium AMOLEDs after constant 24/7 use. Reparo replaces the 6.67-inch LTPO AMOLED in Vienna — EUR 219, 6-month warranty, pickup service or mail-in.
Poco F7 Pro Screen Replacement — Price & Service
- Certified 6.67-inch AMOLED with LTPO 120 Hz
- WQHD+ resolution and HDR10+ support
- Always-on display fully usable again
- Fitted with dust-protection checks
- 6-month warranty on panel & fitting
- All your data, apps and settings stay intact
Diagnostic check 25 EUR, waived on repair. The price is confirmed in writing before we start.
What makes this panel special
The Poco F7 Pro is one of the brightest smartphones of 2025 — a replacement panel has to match that level so you keep its sunlight readability and HDR enjoyment.
The adaptive refresh rate drops to 1 Hz on static content — exactly this mode drives the always-on display and raises the risk of pixel retention with continuous use.
The battery has to be removed during a screen replacement — the large 6,000 mAh pack needs extra care, as its cells cover more area and adhesive contact than standard batteries.
The factory-fitted Gorilla Glass 7i is impact resistant, but in a real drop onto an edge it is just as vulnerable as any other cover glass — we replace the complete panel unit, not only the glass.
What to expect
The Poco F7 Pro is opened, the faulty LTPO AMOLED is removed and replaced with a certified aftermarket panel with WQHD+. The always-on feature is tested after fitting — no more ghost image, no frozen still picture.
Around 2–3 hours. With the Vienna pickup service your F7 Pro is usually back the same day or the next day at the latest. With a mail-in from anywhere in Austria: 1–3 business days after it arrives.
The new panel shows clean black levels, always-on works without burn-in residue and the 120 Hz LTPO switching runs smoothly. The fingerprint sensor under the display is re-calibrated.
EUR 219 fixed price — panel, fitting and 6-month warranty included. Diagnostic check 25 EUR, waived on repair. The price is fixed in writing before we start — no extra charges.
Typical AMOLED faults on the Poco F7 Pro
The time, date or notification icons stay visible as a black still image, even when the screen switches on normally. The affected pixels have lost their brightness through constant load — a panel replacement is the only lasting solution.
The clock area looks slightly brownish or grey against a white background — the sub-pixels there have less luminance than the rest of the panel. This is AMOLED-typical retention that appears on 24/7 always-on users after about a year.
When the adaptive display drops to 1 Hz, a visible flicker or pulsing appears — the panel driver can no longer hold the low frequency stable. This affects only faulty or aged LTPO panels.
A crack runs diagonally across the panel and touch no longer works reliably in certain areas. Even if the glass itself only looks cosmetic — the AMOLED underneath is almost always affected too.
A drop onto the edge often warps the panel film internally — the picture gets a coloured haze in one corner. Software updates do not help, only a complete replacement restores correct colour reproduction.
Around the front-camera cut-out, dark halos or blurry pixels sometimes appear after pressure damage. The selfie function usually stays intact, but the picture becomes visibly impaired toward the edge.
All Poco F7 Pro repairs at a glance.
How the Poco F7 Pro screen replacement works
-
Pickup in Vienna or mail-in Austria-wide
Book an appointment online or by phone. For Vienna customers we come by and collect the F7 Pro. Outside Vienna: pack the device securely and send it to our workshop — return shipping is insured.
-
Intake diagnosis incl. always-on test
We check the panel and touch and test the always-on display for burn-in. The diagnostic check costs 25 EUR and is waived once you approve the job. With a clear always-on retention finding this is done quickly.
-
Device opened, battery module secured
The back cover is released, the 6,000 mAh battery is eased out and the connections to the display module are disconnected. With such a large battery, securing the flex cables is especially delicate.
-
Remove LTPO panel, fit new module
The damaged AMOLED is removed together with the digitiser and fingerprint-sensor module. The replacement panel is fitted, all flex ribbons are connected and the fingerprint sensor is pre-calibrated.
-
Function test: always-on, touch, HDR, 120 Hz
We check the always-on display for at least 15 minutes, run an HDR test video, verify the 120 Hz LTPO switching and test all touch zones. Only with a clean result does the device go back.
-
Return & 6-month warranty
The F7 Pro is delivered back to Vienna customers or shipped back insured. You get a 6-month warranty on the panel and fitting — for follow-up issues without external influence we repair free of charge.
No walk-ins — everything runs through pickup in Vienna or mail-in from Austria.
Is a screen replacement on the Poco F7 Pro still worth it?
The Poco F7 Pro only launched in 2025 — so you have an almost factory-fresh device with Snapdragon flagship performance, a 6,000 mAh battery and 3,200 nits of brightness. A comparable current Xiaomi 14 costs from around EUR 899 new. For EUR 219 your F7 Pro stays fully intact — including data, accounts, apps and your personal setup.
- EUR 219 — transparent fixed price
- Always-on back without burn-in marks
- 6-month warranty on panel & fitting
- LTPO 120 Hz mode fully preserved
- Pickup in Vienna or mail-in
- From around EUR 899 (new price)
- Complete setup restart: apps, logins, 2FA
- Selling the old F7 Pro with a display flaw
- Getting used to a new MIUI/HyperOS version
For an isolated panel fault with no other defects, the replacement at EUR 219 is the clearly better economic choice — almost four times cheaper than a comparable new device.
Which panel does Reparo use for the Poco F7 Pro?
We fit a certified 6.67-inch LTPO AMOLED that matches the WQHD+ resolution and HDR10+ support of the original. Before fitting we run a brightness and colour test, during which we also check the 1 Hz switching for the always-on display. The integrated optical fingerprint sensor is re-initialised after fitting — delete all fingerprints once and register them again, then it works reliably with the new panel.
Poco F7 Pro display frozen — what happens inside the panel?
The Poco F7 Pro is, in 2025, one of the first devices in its price class with an LTPO AMOLED that drops down to 1 Hz. It is exactly this feature that enables an always-on display that barely costs any battery — but it strains the sub-pixels in the clock area for hours every day. Anyone who keeps the always-on display active around the clock loads the same pixel area roughly twice as long as an average display area. After a few months those pixels measurably lose brightness — and that is exactly where the visible ghost image appears that looks as if it is frozen.
A Poco F7 Pro screen replacement at Reparo runs without a shop visit: pickup service in Vienna or send it in by post from anywhere in Austria. The panel is replaced, the device is tested, and you get your F7 Pro back insured. Data, settings and apps stay fully intact.
Fingerprint sensor under the new panel
The optical fingerprint sensor in the F7 Pro works by sending a light pattern through the AMOLED and reading the reflection off your finger. During a panel replacement the distance between the sensor and the glass surface shifts by a few micrometres — which is why all stored fingerprints have to be deleted once and registered again. After that the recognition rate is often even better than before the repair, because no damaged glass scatters the light any more.
Why the always-on display is perfect again after the swap
The new LTPO panel has fresh sub-pixels that have no long-term load behind them yet. We still recommend switching the always-on active time to "Scheduled" or "Smart" — so not around the clock, but for example only between 07:00 and 23:00. That noticeably extends the life of the new panel and delays any possible new pixel retention by years.
Internal links: All Poco F7 Pro repairs · Poco F6 Pro repair · Xiaomi repair Vienna
Frequently asked questions about the Poco F7 Pro screen replacement
Poco F7 Pro screen replacement — what is the price at Reparo?
EUR 219 fixed price. Included is a certified 6.67-inch LTPO AMOLED with WQHD+ resolution, the complete fitting, re-calibration of the fingerprint sensor and a 6-month warranty. The 25 EUR diagnostic check is waived as soon as you approve the repair.
My always-on display is frozen — can it be fixed without a panel swap?
No. Frozen always-on displays are caused by AMOLED pixel retention — individual sub-pixels have permanently lost brightness. Software updates, recovery or a factory reset do not help. Only a replacement of the LTPO panel restores the original picture quality.
What exactly is AMOLED pixel retention in the always-on area?
The sub-pixels in the clock area light up around the clock with a permanently active always-on display — while neighbouring areas are often dark. As a result they age faster. The outcome: a ghost image that stays visible as a faint outline, even when the display shows something else.
How long does the screen replacement on the Poco F7 Pro take?
Usually 2–3 hours. With pickup in Vienna you often get the device back the same day or the next morning. With a mail-in from other provinces we reckon on 1–3 business days from arrival to return shipping.
Poco F7 Pro display shows lines or a colour tint — what does that cost?
EUR 219. Lines, green or magenta tints usually appear after a drop — the panel film has warped internally. A complete panel replacement is the only solution, as these faults cannot be contained or re-adjusted.
Can I just drop the Poco F7 Pro off?
No walk-in possible. Reparo works exclusively through pickup service in Vienna or mail-in from anywhere in Austria. Book an appointment online or call — everything else runs without a shop visit.
How does the pickup service for the F7 Pro in Vienna work?
Book an appointment, give your address — we come to you, collect the F7 Pro and bring it back after the repair. The time slots can be chosen flexibly on weekdays between 08:30 and 18:30. No travel for you.
Can I send the Poco F7 Pro in by post from other provinces?
Yes, from anywhere in Austria. You pack the F7 Pro securely, hand it to the courier and once it arrives with us we start the diagnosis right away. Return shipping is insured — you only cover the cost of sending it in.
Will my data stay intact during the screen replacement?
Yes. The internal storage is not touched during a panel swap. Photos, contacts, apps, logins, WhatsApp chats and all settings stay completely intact. A backup beforehand still makes sense as a general precaution.
What warranty is there on the new LTPO panel?
A 6-month warranty on the panel and the fitting work. If problems such as touch dropouts, colour faults or new always-on retention appear without external influence, we repair them free of charge. With a new drop or water damage it counts as a new case.
Original panel or aftermarket on the Poco F7 Pro?
We use certified LTPO aftermarket panels that match WQHD+, 120 Hz and HDR10+. Original panels from Xiaomi directly are barely available on the open market. Our aftermarket parts go through a brightness and colour test before fitting, including the 1 Hz switching.
What does the diagnosis cost if I only want it checked?
The diagnostic check costs 25 EUR and is fully waived if you have the repair carried out with us. With clear always-on retention or a visible crack the diagnosis is done within a few minutes.
What if the F7 Pro also has water damage?
Then we first check whether the display is really affected in isolation or whether the board has been impacted too. In that case a plain screen replacement is not enough. Give us a quick call beforehand, then we discuss the process — often we add a board cleaning to the repair.
What is the difference between the Poco F7 Pro and Poco F7 Ultra display?
Both models have a 6.67-inch LTPO AMOLED, but the F7 Ultra has more expensive panel binning and finer factory calibration. The repair prices differ slightly — for the F7 Pro we are at EUR 219, for the F7 Ultra correspondingly higher.
Is the repair worth it, or should I just buy new?
For a device from 2025 the repair is practically always worth it. EUR 219 against around EUR 899 for a current Xiaomi 14 — plus you keep all your data, your setup and the familiar HyperOS. Only with several serious defects at once does a new purchase become mathematically interesting.
Poco F7 Pro Screen Replacement in Vienna
EUR 219 fixed price · approx. 2–3 hours · 6-month warranty · LTPO AMOLED replacement incl. always-on clearance